Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

11.06.2025 04:22

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Edit 2024–10.

These are simplified answers to the original question, and does not change anything I wrote above.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

Why is there so much evil in the world?

but this device (an Inductor) … impedes the rapid changes in the current.

The third is lightning and “how it gets conducted into a home.”

What does a fuse do?

Forget running — NASA says ‘rebounding’ is more effective than a 30-minute run, here’s how to do it - Tom's Guide

The bolt then partially travels down the line to your home.

For this case there are devices called Metal oxide varistors (MOV).

He then describes Rainy Season and Lightning.

What do you do you do if your motorcycle chain snaps while riding on the highway?

so, what happens?

He then describes the function of a fuse.

This one hit behind the barn.

US-China trade war sideswipes Europe’s carmakers - politico.eu

2024–10–10[John johnson John Johnson ]

At one ohm, the resistor has a maximum of 1 watt power.

The other is “what does a “fuse” do?”

Louisville earns College World Series trip with 3-2 win over Miami - Card Chronicle

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

eight

Popular Diabetes Drug Linked to Longer Life – Could It Help You Live Past 90? - SciTechDaily

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

the problem then depends on "how fast does the fuse operate?".

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

'Call of Duty: Black Ops 7' to Star Milo Ventimiglia, Kiernan Shipka - Variety

First Sentence:

(Dc diagram shown, AC is similar).

nine

What can I do when I'm ugly on both outside and inside? What do I do? Cut myself off from the world to make everyones lives better? I'm a monster. I hurt feelings, and I say what was said to me. I feel like I'm nothing but a burden. What do I do?

[image of Common-mode choke]

He then asserts :

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Blocking Opioid Receptors May Restore Healthy Dopamine Balance - Neuroscience News

Now when you have a certain ac resistance, then a current flows in a loop.

2024–10–16 [ OO OLAOYE OYEBODE ]

This is 'the assistant's answer'

Scientists Just Found an Ingredient for Life in a Newborn Planet System - The Daily Galaxy

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

When will dating stop being so hard for Gen Z?

There are two important concepts here.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

Top prospects for 2025 Draft arrive in Buffalo for Scouting Combine - NHL.com

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Barnstars:

This is where this question deviates from being a 'generic' question, and becomes more specific.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

It also is a device that limits the change in current flow.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

[old diagram got deleted by accident]

but I think this circuit , shows a few more pieces.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

A circuit breaker is similar, but is resettable.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

2024–10–14 [Omar Gharbi Omar Gharbi ]

In schematic diagrams this is the symbol for a fuse:

One

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

a photo is worth a thousand words.

Here is a simplified AC power diagram.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

This device then solves the entire problem.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Because the load is inductive, the current lags the voltage.(by a bit).

What is lightning?

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

There are three different concepts here that are getting confused.

A fuse is a non-resetable over current circuit protector.

But… the neutral is now “floating” because of the 1 ohm resistance.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

One is “what exactly is in a ‘surge protector’ ? ”

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

The MOV will conduct when the voltage exceeds 50% of line voltage.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Upvotes:

I post the exact comment here.

At least they know the answer if they wanted it.

So, the voltage could go up to 500 volts, and the fuse will not open up.

It seems Mohan does not understand the difference between a comment and an Answer.

This is where the MOV conducts again, and dissipated the energy.

But it can get overloaded, and no longer works.

An AC voltage/ current source, and an ac inductive load.

These devices are installed between the “hot” and “neutral” and protective ground.

what exactly is a ‘surge’ protector?